小皮匠';?>

首页 / 免费教程

制作一个《白日梦想家》同款钱包

By 小皮匠 •  2018-03-07 10:50:17 •  10488次点击







图纸下载
http://img1.pixiaojiang.com/2018-3-7_1026_Mitty.pdf


制作过程


Pick some leather
I recently started to use unwaxed kangaroo leather. It’s about 1mm thick and it’s got a great feel to it. It is a slightly dark tan finish, which will get a bit darker once I seal it with conditioner. This wallet design would work with any similarly thin leather.


Print out pattern
This pattern should give you all the instructions needed to make the wallet. Make sure you print it at 100%


Trace pattern
Trace the pattern including the stitching hole markings (on one side)



Lay pieces on top of each other
Before punching the holes, put the pieces together and clamp them in place.


Clamped piece
Binder clips from the office supply store are useful for clamping the parts together.


Punch the stitching holes
Go along the marked stithing holes with a rotary punch (or similar). If the spacing or alignment is slightly off, don’t worry about it.


Hard to reach places
The centre of the wallet is a bit hard to reach with a normal rotary punch. If you don’t have other punches, you’ll have to crumple the leather a little. Since we’ll stretch and bend the leather later, it doesn’t matter if we leave small marks.


Card Slots
Mark the card slots. Be careful to not get it too close to the main stitching holes punched in the previous step


Cut the card slots
Cut between the 2 card slot holes.



Cut out strip
Cut out the strip that holds the flap down. We’ll align the stitching holes in the next step


Align stitching holes
Hold the strip one hole from the bottom card slot, mark the position of the 2 holes you’ll need on either side and punch them. Make sure that you don’t align it in a way that’ll lead to one hole being too close to the edge.


Condition or Finish
I’m adding some leather conditioner and oil to finish and seal the leather before stitching


Stitching outside
The pattern has all details you’ll need for the correct stitching pattern.
Visit https://highonglue.com/how-to-hand-sew-thick-leather/ for a detailed description of how to sew by hand. I used artificial sinew for this one.



来源https://highonglue.com/tutorial/make-leather-wallet-inspired-secret-life-walter-mitty/

【购买版型设计纸样】
点击链接 http://m.tb.cn/h.WuEiNgq 或复制这条信息¥sJhA0L4T30q¥后打开手机淘宝

钱包 

0 回复 | 直到2025-05-02 03:56添加回复

回复

登录发表 or 还没有账号?去注册